ZāGO Flexible Mouldings
Common Customer Questions

1. What are ZāGO's flexible mouldings made from?
ZāGO's flexible mouldings are made from a polymer resin blend.

2. How much can ZāGO's flexible mouldings be bent?
ZāGO's flexible mouldings can be bent to fit a wide range of curves and radii. However, for very sharp curves, please consult with our engineer for special assistance.

3. Can ZāGO's flexible mouldings be nailed?
Yes. All of our mouldings can be nailed. We also recommend that you use construction adhesive or white glue before nailing, and that you use finishing nails to complete the job. Do not drive nails into the edge of the material, but rather approximately in the center.

4. How are ZāGO's flexible mouldings installed?
ZāGO's flexible mouldings should be installed using the following process:

a. It is recommended that you pre-drill the nail holes as close to the center of the moulding as possible.
b. Use extra-thin layer of adhesive to attach moulding to wall; (Bondo® recommended)
c. Nail moulding to the specified area.

5. Can ZāGO's flexible mouldings be installed outside?
Yes. However, ZāGO's Flexible mouldings should be installed after they have been kept at room temperature for several hours. Following proper installation, ZāGO's flexible mouldings can withstand all climates.

6. Can ZāGO's flexible mouldings be painted and stained?
Yes. All of ZāGO's flexible mouldings can be painted and all of our wood grain mouldings can be stained. No primers are necessary, but make sure the mouldings are clean. Heavy stains such as gel stains, work best.
Clear coat after staining.

7. How should ZāGO's Flexible Mouldings be cleaned before and after painting or staining?
Before painting or staining, ZāGO's Flexible Mouldings should be cleaned with a cloth or brush to remove dust and dirt. Solvents, such as acetone or alcohol can also be used. After painting or staining, the mouldings can be cleaned with a damp cloth, soap and water.

For more information Call (973) 643-6700